BLOG
Explore Voltera's
knowledge base
Learn how to troubleshoot solder defects in PCB prototypes by tracing problems through solder paste selection, deposition, placement, reflow, and inspection.
Research and Case StudiesPrinting Self-Heating Carbon Fiber Composites for UAV Wings with V-OneToday we’re going to dive into how Mohamad K. Idris and his colleagues at York University developed self-heating carbon fiber composites to be...
January 1, 2021
Product DevelopmentHow to Build A Product in a LockdownWhen the COVID-19 lockdowns began, Matt & Rana were in the midst of a hardware development project: creating a cartridge filler for tubes of...
December 1, 2020
Electronics 101Printed Electronics: What Is Inkjet Printing?Additive electronics offer whole new dimensions of possibility in electronics and hardware design. Flexible Hybrid Electronics (FHE) represent a...
December 1, 2020
Flexible Hybrid ElectronicsAsk an Expert: Talking Applications with Rudy Ghosh from NovaCentrixRudy Ghosh, Technical Program Lead at NovaCentrix, works with external partners to find printed electronics solutions to their problems.
November 20, 2020
Company UpdatesVoltera Again Recognized Among Canada's Fastest Growing Tech CompaniesYou’ve probably read a lot of posts this year that start with some variation of “in these uncertain times…” So as a kind of public service, Voltera...
November 1, 2020
Electronics 101Electronic Building Blocks - Dev KitsIn our last post we broke every electronic device into the modules it is made up of. Those 8 building blocks are sensing, signal processing, storage...
October 1, 2020
Research and Case StudiesHacking the Voltera V-One to Print Water DropletsThe V-One was designed to print double-sided PCBs but we know many of our users are hacking it to do more. In fact, we often help them do this.
October 1, 2020
Electronics 101The Building Blocks of ElectronicsWhat series of steps would you take to design a car? Don't worry, this isn't one of those interview questions that gauge your analytic thinking...
September 5, 2020
Research and Case StudiesRapid Prototyping of Microfluidics Using V-OneExplore how researchers from the University of Kuala Lumpur British Malaysia Institute used V-One to create a lab-on-a-chip microfluidics device.
September 1, 2020
Materials ScienceAsk an Expert: Talking Conductive Ink with Mike Mastropeitro from ACIWith 20 years of experience in the industry, Mike Mastropietro from ACI Materials is an expert. In this blog, we asked him about the state of conductive inks. Check out what he says...
August 1, 2020
Didn’t find what you were looking for?
Get in touch to discuss your specific research needs.