How does it work?

The Voltera V-One dispenses conductive ink and solder paste onto FR4, but really... you can use it for whatever you want.

0 Day

Lead time

100's

Of iterations

~5 USD

Board cost.

A prototyping platform for electronics.

On your desktop and on your schedule, the Voltera V-One gets you from prototype to production faster than ever before.

Anyone can use it.

The ink cartridge is installed in the dispenser, and the dispenser is mounted on the V-One. All of our attachments are magnetically mounted, so you do not need any special tools to swap them.

During a print, the dispenser gear will rotate to apply and relieve pressure to accurately control the ink flow. With the click of a few buttons you can be printing 8 mil (200 micron) traces, but don't worry the software will guide you every step of the way.

Ask us anything!

(We read, and reply to every question)

A perfect print every time.

This high precision probe was developed from the ground up and creates a height map of your substrate. The V-One takes the map into account and makes micro adjustments to ensure a constant printing height of 100 microns.

Since we do not need the substrate to be conductive, we can dispense on rigid materials like FR4, glass and ceramics, along with flexible substrates like Kapton (Polyimide).

I design electronics. How does this help me?

Design at your own pace

You don't need to contact a factory across the world to get a few boards made.

It's easy, just load your files and click print. No lead time, no stencils, no hassle.

Reduce the cost of a mistake

Have you ever waited weeks for a board to arrive only to find out you made a mistake?

The V-One prototypes your ideas immediately and at low risk from the comfort of your desk.

No nasty chemicals

Stop using toxic and corrosive chemicals that cannot be flushed down the toilet.

We use a completely additive approach and only deposit material exactly where we need it.

What is in the box?

The V-One comes with all the accessories and consumables you need to start building hardware faster.

The Voltera V-One

The V-One is a 3 axis machine, about the same size as a laptop and can fit on your desk.

It is equipped with a heated platform used to cure conductive ink and to reflow solder paste.

Hover over the items on the left to learn more.

Items not listed here: 3g Tube of Flux, 1 Hello World starter kit.

F.A.Q.

How long does it take to make a board?

What is the print area of the V-One?

Does the V-One drill through holes and vias?

Does the V-One pick-and-place components?

Can it print more than 2 layers?

Technical Specifications

Find the most up to date specifications about the Voltera V-One here. Send us an email if you cannot find what you are looking for.

Printing

Minimum trace width

0.2mm

8 mil

Minimum passive size

1005

0402

Minimum pin-to-pin pitch

0.65mm

32 mil

Resistivity

12mΩ/sq @ 70um height

12mΩ/sq @ 3mil height

Supplied Substrate material

FR4

FR4

Maximum board thickness

3mm

0.125”

Soldering

Minimum Pin-to-Pin pitch

0.5mm

20 mil

Solder Paste Alloy

Sn42/Bi57.6/Ag0.4

Sn42/Bi57.6/Ag0.4

Solder wire alloy

SnBiAg1

SnBiAg1

Soldering Iron Temperature

180-210°C

355-410°F

Print Bed

Print Area

128mm x 105mm

5.0" x 4.1"

Max. heated bed temperature

240°C

464°F

Footprint

Dimensions (L × W × H)

390mm x 257mm x 207mm

15.4” x 10.1” x 8.2”

Weight

~7kg

~15.4lbs

Software Requirements

Operating Systems

Windows 7, 8, 10 (64bit), OSX 10.11+

Windows 7, 8, 10 (64bit), OSX 10.11+

Compatible file format

Gerber

Gerber

Connection type

Wired USB

Wired USB

Want to schedule a call?

Let's find a time to talk!