Conductor 2 Ink Cartridge - 2mL$99.99 USDSKU: 1000388
The Conductor 2 ink is optimized for printing rigid circuits. The printer lays down silver conductive ink to make the traces and pads that comprise your circuit board. After thermal curing, the ink is conductive and ready for reflow.
- Recommended curing temperature is 16°C for 30 minutes (temperature measured at ink surface).
- Compatible with FR1 and FR4 substrates.
- For best results, cure immediately after printing.
- Solder with tin-bismuth-silver solder wire and flux at 180°C, or use preset profile for reflow soldering.
- Download SDS here.
Cartridges must be kept refrigerated, and have a shelf life of 12 months.